PET DOORS
DOG DOORS
CAT DOORS
TO FIT THE FOLLOWING:

SLIDING GLASS

DUAL PANE ALUMINUM:
THERMO PANEL IIIe
HALE

SINGLE PANE ALUMINUM:
QUICK PANEL III
FAST FIT
JOHNSON

WINDOW MOUNT

DOOR MOUNT

WALL MOUNT

SCREEN MOUNT

ELECTRONIC

KENNEL

FRENCH DOOR / CUSTOM

REPLACEMENT FLAPS

SLIDER PARTS

PET DOOR HOODS

NEED HELP?

SEE SITE MAP

CONTACT:

TOLL FREE
CUSTOMER SERVICE & FAX:
(866) 377-3667

SLIDING GLASS PET DOOR

Hale Pet Door^TM Standard Panel

• Double flap design
• Fuzzy weather strip seals flaps to frame
• Multiple magnets hold flap shut
• Tempered dual pane glass
• 3/4" thick aluminum frame
• Adapter channel for better sealing
• Cut to fit design requires hacksaw
• Color matched locking cover
• Buit to fit the height of your door
• 1 inch rise is standard, 5 inch rise optional
• 11 different flap sizes for any pet

Patio installation of a dog door can allow your pet access to the outdoors. The Hale is an extremely weather tight panel for your patio door.

This Hale pet door has dual pane glass and dual flaps. That's not a 2 piece flap, that is 2 completely separate flaps. There is a flap on the inside of the frame, and another on the outside of the frame. The flaps seal to the frame with multiple magnets are located on the sides and bottom of the flaps on medium and larger sizes. This pet door also has a fuzzy weather stripping between the flap and the frame. To address possible leaks between the pet door and the sliding door this unit comes with an adapter channel. The adapter channel fits onto the edge of your sliding glass door. When you close the door, the adapter channel actually covers over the edge of the panel, so that instead of butting up against the pet door as the other panels on the market do, the slider actually closes over the end of the Hale pet door.

This sliding glass pet door is a "semi-permanent" installation. It is a bit more complicated than the other "temporary" sliding glass pet doors on the market. The frame pieces need to be cut down with a hacksaw to fit the pet door into the frame. The Hale pet door is then inserted into the sliding door track and screwed into place. Once in place the adapter channel has to be screwed to the edge of the sliding door. The locking cover is made from a tough color matched UV resistant marine grade Starboard plastic that comes with a steel spring loaded lock for maximum security.

If the idea of cutting the panel or drilling holes in the sliding door or the frame doesn't appeal to you, consider the Thermo Panel III as an alternative.

5 year limited warranty.

Since this Hale pet door is custom built it takes approximately 3 weeks to receive your order (including shipping time). Custom orders are not returnable or refundable.

The color sample on the right will vary with your particular monitor, and the colors of the pet doors vary slightly by manufacturer, but it is shown to give an approximate idea of the colors available. Satin is actually a brushed aluminum, similar to the bottom of a soda can.

	Size	Flap Dimension	Rise	Up to 80 inch	Shipping
	Small	5 ½ x 7 ½	1½	635.00	FREE *
	Small/Medium	6 ½ x 9 ½	1½	685.00	FREE *
	Medium	8 ½ x 12 ½	1½ or 5	750.00	FREE *
	Tall Medium	8 ½ x 16	1½ or 5	770.00	FREE *
	Large	11 x 16	1½ or 5	835.00	FREE *
	Tall Large	11 x 19 ½	1½ or 5	850.00	FREE *
	Tall Large Plus	11 x 23 ½	1½ or 5	880.00	FREE *
	Extra Tall Large	11 x 27 ½	1½ or 5	930.00	FREE *
	Extra Large	14 x 19½	1½ or 5	905.00	FREE *
	Extra Large Plus	14 x 23 ½	1½ or 5	945.00	FREE *
	Giant	15 ½ x 27 ½	1½ or 5	1000.00	FREE *

Pet Door Store Grade for Hale Panel - A
The Hale Standard panel is a very high quality door with dual pane glass and dual flaps that is made in the USA. Hale offers the largest selection of flap sizes and the lowest rise available.