Pride Replacement Flap Assembly - ALSO FITS JOHNSON DOORS

(18 reviews) Write a Review
As low as $29.95

Product Overview

Pride Pet Door Flaps are two piece black rubber flaps that are direct replacements for Johnson flaps in medium, large and extra large sizes

 

Pride pet door flaps are black rubber two piece assemblies. The parts are not available separately, they are sold together. These flaps are generally quite durable and often times the flap size is completely worn off, in which case you will need to measure the flap to see which one you need. We measure inside of the U shaped part of the flap which is the smallest hole that your pet needs to go through. If you measure the outside of the flap you will end up with the wrong flap, so be careful.

Pride flaps are a direct replacement for Johnson and Pet Safe doors with 2 piece flaps for medium and larger sizes. Although this isn't the best picture, the Pride flaps have the same center flap and U shaped flap. M-2 or medium is the same as MD400A, L-2 or large is the same as LD500A, and XL-4 or extra large is the same as XLD600A.

We have had just a handful of out of hundreds of customers tell us that their MD400 flap didn't fit a plastic framed Johnson door correctly. The flap can be trimmed to work if you'd rather not replace the door. We did have one customer who said that the MD400 flap was too long for his Johnson panel pet door for a sliding door and he ended up returning it.

The S-2 or small flap is similar in size to the SD300A but mounts differently. You will have to trim the small flap and punch holes in the top to make it function.

If your frame is damaged you can purchase an entire Pride pet door here.

Pride uses Masonite or pressboard locking covers, these covers do not fit Johnson doggy doors.

Reviews

(18 reviews) Write a Review

18 Reviews Hide Reviews Show Reviews

  • 5
    Doors always fit..my rottweilers tear them up however..I e replaced 3 in the past 3 mos.

    Posted by mbrotts2014@gmail.com on Mar 19th 2019

    Dogs year them up

  • 3
    Johnson Pet Door replacement flaps

    Posted by The Boys Mom on Aug 12th 2018

    This is not clear and the dogs can't see through it. Do not like it as they cannot see if another dog is coming in or going out and they could run into each other potentially hurting one or both of them.

  • 4
    Pride replacement pet. Door

    Posted by Dawn on Aug 7th 2018

    It fits perfectly and was easy enough to install. The only think I don’t care for is that it is opaque (as stated in the description). My pets were a little reluctant to use it since they couldn’t see to the other side.

  • 2
    Pride Replacement Flap

    Posted by djk930@gmail.com on Jul 24th 2018

    Pet Door Store says that the small Pride flap can be modified to fit the small PetSafe Ultimate pet door.

    Well, as much as I like the owner, Jon, I was unable to modify it to work. I gave it two stars based upon that fact, and did not give it one star, because it is a very nice piece of rubber, and do believe that if it were for the door that it does fit, it would likely get 5 Stars.

    Good luck to Jon.

  • 5
    Perfect fit

    Posted by Mike Haynes on Dec 22nd 2017

    Fits my ancient Johnson L-2 door perfectly. 15-minute install. Good instructions. Much easier than a new door. Very sturdy. So glad I found this item!

  • 5
    Mrs

    Posted by Janie Busch on Jun 28th 2017

    A perfect replacement flap for my older dog door. Thank you for providing this item, and for the quick shipment. The flap was easy to install, good instructions.

  • 5
    consumer

    Posted by Annie Pike on Apr 19th 2017

    Fits perfectly as a replacement for a Pet-safe dog door flap that is no longer available through the original manufacturer. Thank you, and great customer service.

  • 4
    Homeowner

    Posted by Deb on Jan 7th 2017

    I have an older Johnson pet door and this was a close replacement for the worn out original two piece flap. I did have to modify this new flap by cutting 1/4 inch from the sides and bottom on a table saw to make it function properly. The new flap is stiffer and my cat had trouble going in and out but learn he needs to use extra effort, my dog had not problems adapting to the stiffer material. Over all a very good by, sure beats having to totally replace the pet door.

  • 2
    None

    Posted by Rich on Jul 25th 2016

    This is the 4th time I have had to replace this doggy door. I have a Lab and this item just does not hold up. It has broken in the same lower bottom corners every time. II was able to use black duck tape to patch them for a while but that only works for so long. I would replace but the door cut out is bigger than any other doggy doors I have looked at.<br><br> PDS RESPONSE--The Johnson and Pride flaps have a problem sometimes when a pet charges through at full speed. What happens is the center flap pushes through the outer U shaped part, and then the dog gets the U part around their neck, and when they try to go through it *should* pull the flap out of the frame. These flaps have a slit at the top corners so that they don't tear at the bottom. We've seen several customers use bolts, washers, and nuts so that they can really tighten this up and the flap doesn't pull out, and that's typically when they tear at the bottom. <br><br> The solution is to loosen up the screws so that the flap can pull out without breaking, although that leaves you putting the flap back in over and over. If you don't want to be putting the flap back in all the time, then you can replace the whole door. I checked and you have an XL door, which has a really wide hole, but you could use a larger extra large size from a different manufacturer such as Ruff Weather, Royal, or Hale and just cut the hole bigger. We can have the Hale custom built to fit the same opening as the current door so that you don't have to modify the hole. <br><br> We also sell just the U part of the flap separately, so no need to buy the center part again and again.